• Full Tower E-ATX Highly Compatible Gaming Case:
    • CPU/GPU Temperature Display:
      • By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
      • The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
      • Note: The Antec iUnity software must be installed.
    • Antec iUnity:
      • The Antec iUnity Software provides instant data on PC specs, loads, and usage.
      • Download here
    • I/O Panel:
      • Including the mainstream USB Type-C (10Gbps) port for high-speed transfer.
      • Included dust plugs for dust prevention.
      • Mic/Audio 2-in-1 port.
    • 4mm Tempered Glass Side Panels:
      • Both side panels adopt tempered glass for better PC showcase visual effects.
    • Cable Management On Point:
      • 2 cable covers are included for beautifying the cable management area.
      • There are ten sets of velcro straps for easy cable management:
        • Three sets of velcro straps for fan & I/O cable routing.
        • Five velcro straps for hardware and power supply cables.
        • Two velcro straps at the rear for rear I/O cable routing.
    • 30mm Thick Pre-Installed Storm T3 PWM Fans:
      • 3 x Storm T3 140mm PWM Fans at the Front.
      • 1 x Storm T3 120mm PWM Fan at the Rear.
      • The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
      • The PWM function easily reaches the balance between cooling and silence.
    • Exquisite Steel Mesh:
      • The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
    • Best Airflow Path For GPU Cooling:
      • Airflow-enhancing mesh front panel provides massive air.
      • Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for GPU cooling.
    • Dust Filters:
      • Top: Magnetic dust filter.
      • Front: Magnetic & clip-on dust filter.
      • Bottom: Full-sized pull-out dust filter.
    • Supports RTX 40 Series Graphics Cards:
      • Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
    • Thoughtful Design:
      • Stud for Fixing: The stud for fixing design provides a more convenient PC-DIY experience.
      • Back-Mounted PSU Bracket: For easy installation.
      • Drop-Proof Bolt: The drop-proof hook design avoids side panel damage.
      • Rubber Grommets: 4 included rubber grommets for cable routing.
      • 8 x Fully Open PCIe Slots: Bridgeless design supports vertical GPU installation.
      • Rear Velcro Straps: For the rear I/O cable routing.
    • Best Cooling Design:
      • Supports a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm).
      • Supports 360mm radiators at the front and top simultaneously.
      • Up to 10 fans simultaneously.
    • Modular Drive Trays:
      • Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
    • Case Compatibility - Extensive Interior:
      • Motherboard support: E-ATX (up to 285 mm), ATX, Micro-ATX, ITX.
      • CPU cooler max height: 175 mm.
      • GPU max length: 400 mm.
      • Power Supply max length: 245 mm (with HDD) / 440 mm (without HDD).
  • Specification:
  • Form Factor: E-ATX
  • Power Supply Wattage: No PSU
  • Motherboard Support: E-ATX up to 285mm, ATX, Micro ATX, Mini ITX
  • Connectors / Controls:
    • 1 x USB 10Gbps Type-C
    • 2 x USB 3.0
    • Audio I/O
    • Temp. Display Switch
  • Drive Bays:
    • 3 x 2.5"
    • 2/2 x 3.5"/2.5" Drive Mounts
  • Expansion Slots: 8 Expansion Slots
  • Cooling System:
    • Included Fans:
      • Front: 3 x Storm T3 PWM 140mm fans
      • Rear: 1 x Storm T3 PWM 120mm fan
    • Fan Mounts:
      • Front: 3 x 120 / 3 x 140 mm
      • Top: 3 x 120 / 3 x 140 mm
      • Rear: 1 x 120 mm
      • PSU Shroud: 3 x 120 mm
    • Radiator Options:
      • Front: Up to 420 mm
      • Top: Up to 360 mm
      • Rear: 120 mm
  • Colour: White
  • Material: Steel & Plastic
  • 4mm Tempered Glass Side Panels
  • Compatibility:
    • GPU max length: 400 mm
    • CPU cooler max height: 175 mm
    • PSU max length: 245 mm (with HDD), 440 mm (without HDD)
  • Weight/Dimensions:
    • Weight: 12.55 kg
    • Dimensions (DxWxH): 522 x 230 x 522 cm
  • Additional Features: See Overview / Video
  • Package Weight: 14.8500 kg
  • Warranty: 2 Years

Antec

Antec Performance 1 FT Gaming Case w/ Glass Side Panels, E-ATX, 4 PWM Fans, CPU/GPU Temp Display, iUnity Monitoring Software, USB-C, White

£129.99
  • Full Tower E-ATX Highly Compatible Gaming Case:
    • CPU/GPU Temperature Display:
      • By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
      • The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
      • Note: The Antec iUnity software must be installed.
    • Antec iUnity:
      • The Antec iUnity Software provides instant data on PC specs, loads, and usage.
      • Download here
    • I/O Panel:
      • Including the mainstream USB Type-C (10Gbps) port for high-speed transfer.
      • Included dust plugs for dust prevention.
      • Mic/Audio 2-in-1 port.
    • 4mm Tempered Glass Side Panels:
      • Both side panels adopt tempered glass for better PC showcase visual effects.
    • Cable Management On Point:
      • 2 cable covers are included for beautifying the cable management area.
      • There are ten sets of velcro straps for easy cable management:
        • Three sets of velcro straps for fan & I/O cable routing.
        • Five velcro straps for hardware and power supply cables.
        • Two velcro straps at the rear for rear I/O cable routing.
    • 30mm Thick Pre-Installed Storm T3 PWM Fans:
      • 3 x Storm T3 140mm PWM Fans at the Front.
      • 1 x Storm T3 120mm PWM Fan at the Rear.
      • The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
      • The PWM function easily reaches the balance between cooling and silence.
    • Exquisite Steel Mesh:
      • The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
    • Best Airflow Path For GPU Cooling:
      • Airflow-enhancing mesh front panel provides massive air.
      • Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for GPU cooling.
    • Dust Filters:
      • Top: Magnetic dust filter.
      • Front: Magnetic & clip-on dust filter.
      • Bottom: Full-sized pull-out dust filter.
    • Supports RTX 40 Series Graphics Cards:
      • Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
    • Thoughtful Design:
      • Stud for Fixing: The stud for fixing design provides a more convenient PC-DIY experience.
      • Back-Mounted PSU Bracket: For easy installation.
      • Drop-Proof Bolt: The drop-proof hook design avoids side panel damage.
      • Rubber Grommets: 4 included rubber grommets for cable routing.
      • 8 x Fully Open PCIe Slots: Bridgeless design supports vertical GPU installation.
      • Rear Velcro Straps: For the rear I/O cable routing.
    • Best Cooling Design:
      • Supports a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm).
      • Supports 360mm radiators at the front and top simultaneously.
      • Up to 10 fans simultaneously.
    • Modular Drive Trays:
      • Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
    • Case Compatibility - Extensive Interior:
      • Motherboard support: E-ATX (up to 285 mm), ATX, Micro-ATX, ITX.
      • CPU cooler max height: 175 mm.
      • GPU max length: 400 mm.
      • Power Supply max length: 245 mm (with HDD) / 440 mm (without HDD).
  • Specification:
  • Form Factor: E-ATX
  • Power Supply Wattage: No PSU
  • Motherboard Support: E-ATX up to 285mm, ATX, Micro ATX, Mini ITX
  • Connectors / Controls:
    • 1 x USB 10Gbps Type-C
    • 2 x USB 3.0
    • Audio I/O
    • Temp. Display Switch
  • Drive Bays:
    • 3 x 2.5"
    • 2/2 x 3.5"/2.5" Drive Mounts
  • Expansion Slots: 8 Expansion Slots
  • Cooling System:
    • Included Fans:
      • Front: 3 x Storm T3 PWM 140mm fans
      • Rear: 1 x Storm T3 PWM 120mm fan
    • Fan Mounts:
      • Front: 3 x 120 / 3 x 140 mm
      • Top: 3 x 120 / 3 x 140 mm
      • Rear: 1 x 120 mm
      • PSU Shroud: 3 x 120 mm
    • Radiator Options:
      • Front: Up to 420 mm
      • Top: Up to 360 mm
      • Rear: 120 mm
  • Colour: White
  • Material: Steel & Plastic
  • 4mm Tempered Glass Side Panels
  • Compatibility:
    • GPU max length: 400 mm
    • CPU cooler max height: 175 mm
    • PSU max length: 245 mm (with HDD), 440 mm (without HDD)
  • Weight/Dimensions:
    • Weight: 12.55 kg
    • Dimensions (DxWxH): 522 x 230 x 522 cm
  • Additional Features: See Overview / Video
  • Package Weight: 14.8500 kg
  • Warranty: 2 Years
£129.99
  • AMD Ryzen Processor
  • Asus
  • MSI
  • Asus Rog Strix
  • Intel Processor
  • AOC gaming Monitor
  • Asrock Phantom Gaming
  • Asus Tuf gaming
  • Lenovo Legion Laptop

 

 

 

 

 

 

 

 

 
  • Full Tower E-ATX Highly Compatible Gaming Case:
    • CPU/GPU Temperature Display:
      • By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
      • The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
      • Note: The Antec iUnity software must be installed.
    • Antec iUnity:
      • The Antec iUnity Software provides instant data on PC specs, loads, and usage.
      • Download here
    • I/O Panel:
      • Including the mainstream USB Type-C (10Gbps) port for high-speed transfer.
      • Included dust plugs for dust prevention.
      • Mic/Audio 2-in-1 port.
    • 4mm Tempered Glass Side Panels:
      • Both side panels adopt tempered glass for better PC showcase visual effects.
    • Cable Management On Point:
      • 2 cable covers are included for beautifying the cable management area.
      • There are ten sets of velcro straps for easy cable management:
        • Three sets of velcro straps for fan & I/O cable routing.
        • Five velcro straps for hardware and power supply cables.
        • Two velcro straps at the rear for rear I/O cable routing.
    • 30mm Thick Pre-Installed Storm T3 PWM Fans:
      • 3 x Storm T3 140mm PWM Fans at the Front.
      • 1 x Storm T3 120mm PWM Fan at the Rear.
      • The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
      • The PWM function easily reaches the balance between cooling and silence.
    • Exquisite Steel Mesh:
      • The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
    • Best Airflow Path For GPU Cooling:
      • Airflow-enhancing mesh front panel provides massive air.
      • Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for GPU cooling.
    • Dust Filters:
      • Top: Magnetic dust filter.
      • Front: Magnetic & clip-on dust filter.
      • Bottom: Full-sized pull-out dust filter.
    • Supports RTX 40 Series Graphics Cards:
      • Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
    • Thoughtful Design:
      • Stud for Fixing: The stud for fixing design provides a more convenient PC-DIY experience.
      • Back-Mounted PSU Bracket: For easy installation.
      • Drop-Proof Bolt: The drop-proof hook design avoids side panel damage.
      • Rubber Grommets: 4 included rubber grommets for cable routing.
      • 8 x Fully Open PCIe Slots: Bridgeless design supports vertical GPU installation.
      • Rear Velcro Straps: For the rear I/O cable routing.
    • Best Cooling Design:
      • Supports a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm).
      • Supports 360mm radiators at the front and top simultaneously.
      • Up to 10 fans simultaneously.
    • Modular Drive Trays:
      • Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
    • Case Compatibility - Extensive Interior:
      • Motherboard support: E-ATX (up to 285 mm), ATX, Micro-ATX, ITX.
      • CPU cooler max height: 175 mm.
      • GPU max length: 400 mm.
      • Power Supply max length: 245 mm (with HDD) / 440 mm (without HDD).
  • Specification:
  • Form Factor: E-ATX
  • Power Supply Wattage: No PSU
  • Motherboard Support: E-ATX up to 285mm, ATX, Micro ATX, Mini ITX
  • Connectors / Controls:
    • 1 x USB 10Gbps Type-C
    • 2 x USB 3.0
    • Audio I/O
    • Temp. Display Switch
  • Drive Bays:
    • 3 x 2.5"
    • 2/2 x 3.5"/2.5" Drive Mounts
  • Expansion Slots: 8 Expansion Slots
  • Cooling System:
    • Included Fans:
      • Front: 3 x Storm T3 PWM 140mm fans
      • Rear: 1 x Storm T3 PWM 120mm fan
    • Fan Mounts:
      • Front: 3 x 120 / 3 x 140 mm
      • Top: 3 x 120 / 3 x 140 mm
      • Rear: 1 x 120 mm
      • PSU Shroud: 3 x 120 mm
    • Radiator Options:
      • Front: Up to 420 mm
      • Top: Up to 360 mm
      • Rear: 120 mm
  • Colour: White
  • Material: Steel & Plastic
  • 4mm Tempered Glass Side Panels
  • Compatibility:
    • GPU max length: 400 mm
    • CPU cooler max height: 175 mm
    • PSU max length: 245 mm (with HDD), 440 mm (without HDD)
  • Weight/Dimensions:
    • Weight: 12.55 kg
    • Dimensions (DxWxH): 522 x 230 x 522 cm
  • Additional Features: See Overview / Video
  • Package Weight: 14.8500 kg
  • Warranty: 2 Years
Can i get next-day delivery?
Absolutely, we offer next business day delivery for our products.
Read next

  • Free Delivery

    Free next Business Day Delivery

  • Next Day Delivery

    Order Before 4PM For Next Business Day Delivery

  • Money back Guarantee

    14 Days Money Back Guarantee

  • Warranty

    We Do Offer Warranty For All Of Our Products